Floating Dock Hardware
HD Connector Hinge: Use at both ends of ramps when connecting sections to shore or joining multiple sections

Floating Dock Hardware
Inside Corner: For lighter duty applications where an outside corner is not necessary

Floating Dock Hardware
Inside Anchor Corner: Use as inside corner. Adds extra strength with an anchor chain bar. Accepts chain up to 1/2 inch

Floating Dock Hardware
Backer Plate: Used to sandwich wood framing when another piece of hardware is not used. Prevents bolts from loosening and pulling through

Floating Dock Hardware
Connector Pin: Used to join male and female connectors

Floating Dock Hardware
HD Anchor Chain Corner: Offers maximum corner strength when used with 99-004-F Outside Corner or any corner connecting hinge

Floating Dock Hardware
Joist Corner: Use to mount stringers with 99-006-F washer plates. Also use as a backer plate to prevent cleats from pulling through

Floating Dock Hardware
Outside Corner: Use with backer plates or inside corners at outside ends

Floating Dock Hardware
Side Pipe Holder: Bolts to side of dock frame to anchor it in place, yet allows vertical movement for water variances

Floating Dock Hardware
Washer Plate: Use with Joist corner, or as a backer plate to prevent cleats from pulling through

Floating Dock Hardware
Inside Corner Pipe Holder: With slottd holes for various wood thicknesses

Floating Dock Hardware
Male Corner Hinge: Combines an Outside Corner Bracket with a Male Hinge

Floating Dock Hardware
Female Corner Hinge: Combines an Outside Corner Bracket with a Female Hinge

Floating Dock Hardware
Female T Connector Hinge: USe with all styles of Male Hinges

Floating Dock Hardware
Male T Connector Hinge: Use with all styles of Female Hinges

Floating Dock Hardware
Chain Retainer: Hods chain up to 1/2 inch to secure the dock in position

Pole Dock Hardware
Corner Leg Holder: Mounts on inside corner of framework

Pole Dock Hardware
Side Leg Holder: Can be mointed inside or outside of the dock frame

Pole Dock Hardware
Base Plate: Used as a footing. May be bolted to a 2x6 piece of lumber and joined to an adjacent base plate for stability

Pole Dock Hardware
Connector Hinge: Used to join dock sections or a fixed ramp to the dock at varying angles. Includes hinge pin

Pole Dock Hardware
Corner Plate: Used on inside corners for increased strength

Pole Dock Hardware
Corner Leg Brace Holder: Use when attaching an 89-101-F Leg Brace from corner to side legs for stability

Pole Dock Hardware
Backer Plate: Prevents pipe from deforming wood causing bolt loosening and dock shifting

Pole Dock Hardware
Leg Brace Set: Extends up to 72 inches. Use with Leg Brace Holders to connect legs for stability

Pole Dock Hardware
Pipe Cap: Use to cover raw leg pipe edges. Gives the dock a finishing touch

Pole Dock Hardware
Anchor Tie Down Corner: Used to secure dock in place. May also be used as inside corner for added strength

Pole Dock Hardware
Leg Brace Holder: Use with Leg Brace Set to connect leg pipes for stability

Pole Dock Hardware
Galvalume Leg Pipe: Available in two sizes

Pole Dock Hardware
Bottom Pad: Use for soft bottom applications. Allows leg pipe to extend through to lake bed for lateral support

Pole Dock Hardware
Joist Corner: Used to reinforce stringer joints

Fasteners
A full line of stainless steel and galvanized Lag Screws are available

Fasteners
A full line of stainless steel and galvanized Washers are available

Fasteners
A full line of stainless steel and galvanized Carriage Bolts are available

Fasteners
A full line of stainless steel and galvanized Hex Bolts are available

Fasteners
A full line of stainless steel and galvanized Nuts are available